Diy Pullout Card

My very first Diy!

I'm very excited to announce that this is my very first Do it yourself project. I hope that you enjoy making it.
Note : (Send me a message to receive a free template of the design so that you can add your own pictures)

Planning a special occasion can be hectic at times and a little expensive, especially when it involves organizing a wedding. With the right materials, you can easily create this unique pullout invitation card on a tight budget.

Here is a list of the things that you would need: 

Materials needed:

*300 gram paper
*Stencil knife
*Double sided tissue tape ( width of 1 cm )
*Clear Tape
*Stapler
* Printer (or somewhere that can print )

Step 1

Print and cut out your design. Leave about 2cm space on the outside paper (you can find an empty template below)

Step 2

Attach strip onto the inside paper

Step 3
Cut a line along the film strip so that it is just enough for the inside paper to pass through.

Fold the extra piece so that the white part does not show on the "outside paper" ( below is an example of how it should look at the end )

Step 4
On the back of the "outside paper" apply the tissue tape along the three sides. Also apply on the back of the folded piece.

Step 5

Place the inside paper through the slit. Make sure that the small strip at the end is not touching the tissue tape. (Trim if necessary but make sure it is wider than the inside paper ). Remove the tape and press the folded area down. Remove the tape on the back of the folded piece.

Step 6

Take a small piece of tape and place it inside of the folded area. Make sure that the sticky side is facing up .​Please Note: This step is very important as it can affect the inside piece from moving smoothly.

Step 7
Place the top piece over a blank piece of paper (300gram paper) and cut around the edges.

Voila!

And you're all done.

If there is a step that you do not understand or I was not too clear about please do not hesitate to ask.